Finish1 Clearcoat kit
You will receive 1 gal of FC720 and 1 qt of FH612 or FH613
FC720 is a 4.29 VOC high solids, urethane clearcoat designed for overall refinishing. This clearcoat works well in air dry or force dry environments and provide excellent gloss, DOI, leveling, blending, and buffing characteristics
NOT FOR SALE TO CALIFORNIA MARYLAND DELAWARE RESIDENCE
Due to the High VOC limits for California Maryland Delaware, check your location regulations to verify it can be used in your area.
Mix 4:1 with hardener
Made in the USA
FC720 can be applied over Basecoats or cured Single-Stage Enamels
Apply 2 coats, allowing each coat to flash to hand-slick between coats or a wet-on-wet “limited flash” application can be used allowing a 2-5 minute flash between coats.
Adjust air pressure to: HVLP 8 - 10 psi, Conventional 50 – 60 psi
Basecoat: 10-15 minutes
Single-Stage Enamels: 8 hours to overnight dry
Clearcoat: Allow FC720 clearcoat to dry overnight, then scuff with 1000 grit and reapply clearcoat